Hunter Engineering Quick Tread Hoja de especificaciones

Busca en linea o descarga Hoja de especificaciones para No Hunter Engineering Quick Tread. Hunter Engineering Quick Tread Specification Sheet Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 2
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
Quick Tread - Stand Alone
Flush Mounted
For inspection information visit:
www.hunter.com/inspection
For local contact visit:
www.hunter.com/company/ndrep.cfm
For general inquiries visit:
www.hunter.com
or call
800 448-6848
Form 6897-T, 05-15a
Copyright © 2015, Hunter Engineering Company
Stand-Alone Flush Mount Quick
Tread Installation
Continued on Page 2
12 ft.
RECOMMENDED
BAY WIDTH
OPTIONAL
PEDESTAL
LOCATION
OVERALL FOOTPRINT
QUICK TREAD COMMUNICATION CABLES (UP TO 75 ft.)
4 in.
51 in.
22 ft. 5 in.
TYPICAL
93 in.
(7 ft. 9 in.)
Site Specications
Power Requirements
115/230v, 15 amp
*
50/60 Hz 1 ph
Ɨ
Air Supply Req. (IS Units)
90-150 PSI (6.2-10.3 bar)
Approximate Air
Consumption
25 SCFM @ 90 PSI
(648 Lpm @ 6.2 bar)
Substructure Specications
Refer to Form 6905-T
Pedestal Location
36 - 96 in. (914 - 2438 mm) from QT1F
Product Specications
Max. Wheel Weight
3500 lb. (1588 kg) per wheel
Test Entry Speed
2 to 8 mph (3-13 km/h)
Shipping Weight
Quick Check Cabinet
290 lbs (132 kg)
Quick Check Drive Under
Sensor
316 lbs (143 kg)
Quick Tread
1723 lbs (455 kg)
*
Amperage shown is minimal circuit rating.
Ɨ
Isolated ground recommended.
Vista de pagina 0
1 2

Indice de contenidos

Pagina 1 - Flush Mounted

Quick Tread - Stand AloneFlush MountedFor inspection information visit:www.hunter.com/inspectionFor local contact visit:www.hunter.com/company/ndrep.

Pagina 2

Quick Tread - Stand AloneFlush MountedQUICK CHECK DIMENSIONSPIT & CONDUIT SPECIFICATIONS 32 in. 23 1/2 in.67 1/4 in.(5 ft. 7 1/4 in.)QUICK TREAD D

Comentarios a estos manuales

Sin comentarios